CEN MATRIX TR NO E-Clip Mod!
[ratings]
Latest news from lockmouth. The no e-clip mod. great stuff. Continue from 1st post here…
I got the hinge pin upgrades for the front upper and the front lower hinge pins, but that left me with the e-clips on the outer arms front and back.
I just hate e-clips so I decided to pull out the dremel and solve this problem. I shaved the hinge pin down first, then I made holes in each arm on the front and back side close to the hinge pin hole an used a button head screw to hold them in.
Here is a link to the upgraded capture pins for the front upper and lower.
Front upper
http://www.carolinasrc.com/Webstore…?idproduct=3402Front lower
http://www.carolinasrc.com/Webstore…?idproduct=3401
Source: Lockmouth of rctech!
Related post: CEN MATRIX TR
5 Responses to “CEN MATRIX TR NO E-Clip Mod!”
By rdub202 on Jan 28, 2007 | Reply
BRILLIANT! i love that idea. good work. great lookin truck
By MikeyMike1969 on Jul 8, 2007 | Reply
That’s a great idea. I’ll be doing mine tonight.
What size screw did you use?
Mike
By webmaster on Jul 8, 2007 | Reply
I think its M3×10 or 8 should be ok.
By MikeyMike1969 on Jul 8, 2007 | Reply
Great, thanks.
Have you had any problem with them backing out?
By webmaster on Jul 8, 2007 | Reply
Sorry my friend… the Matrix is not mine.. but I did the same mod on my other ride, it won’t back off by itself. Well, just before any race, just put some glue on the screw. Thta shud do it