Archive for the ‘1/10th Nitro RC Car’ Category
Saturday, November 8th, 2008 | 161 views
Another great product from the artist of Team Xray. New Xray Team Carrying Bag for the 1/10 Touring Car racer.
Smart, stylish and distinctive, the light and ultra-versatile XRAY Team Carrying Bag is large and spacious enough to carry your RC car, tools, set-up equipment and gear to any track with comfort and ease. All walls are cushioned with protective foam, keeping your equipment safe within.
The spacious 500×250x420mm interior is easily accessible through the zippered bag end. There is interior room for different combinations of different-sized storage boxes for carrying any type of RC gear (including your car). The bag comes standard with 1 large + 3 small storage boxes, or optionally 3 large storage boxes may be used. The strong, reinforced, waterproof storage boxes are made from a special high-quality rigid composite material for long life and extra durability.
Source: Team Xray. Thanks to Partner RedRC.Net for the first peek 
.
Permanent link to this post (154 words, 3 images, estimated 37 secs reading time)
Posted in 1/10th Nitro RC Car, Xray | No Comments »
Thursday, November 6th, 2008 | 368 views
I know this is way belated and overdue. Organizing HMS Racing October 2008 Cup race held on 25th to 26th October has been ruined by the not so sporting tropical weather of Kota Kinabalu Sabah. I am sure up to this day, racers attended the race with full hope to compete still cannot get rid the feelings of frustration for there is actually NO RACE happening on these date. Sad but true 
Whatever it is, we had captured some moments of the race event,
Posted in 1/10th Nitro RC Car, 1/8th Nitro Car, HMS Racing, Serpent | No Comments »
Saturday, October 25th, 2008 | 227 views
The race is finally here and everyone seems to be ready. Everyone seems to be anxious for today is the big day - 25th October, Saturday, the qualifying day for every racers. Sunday, 26th October will be the final. We try our best to do the coverage. Are you ready for it?
LET’S RACE!!!
All the big guns racers are there. We expected some explosive qualifying and maybe some dramas with the result. That surely will ad the fun factor in RC Racing. Team all the way from Peninsular Malaysia, like Team BM Marshall representing Team Xray and Motonica, The Mizan gang with their Serpents car, The Bruneian top driver Wirawan and their gangs, Team Chris Lim from another Brunei’s team and of course, the ever supportive from Sarawak, bringing their Serpents, Xray and most of all the new 1/8th Motonica cars.
Posted in 1/10th Nitro RC Car, 1/8th Nitro Car, HMS Racing | Comments Off
Friday, October 3rd, 2008 | 129 views
This is another great invention by none other than from Team Xray. The Xray NT1 Front Middle Shaft which is 50 percent lighter than the standard yet still maintain the strength and durability with its world renowned HUDY Spring Steel™.
For serious racers conscious of weight savings, XRAY’s new optional front middle shaft is CNC-machined from world-renowned HUDY Spring Steel™., and has been strategically lightened by 50% compared to the standard #335710 front middle shaft. The front middle shaft is highly wear resistant at contact points, helping to increase the lifespan of the shaft bearings. Rotating mass is reduced without sacrificing strength or durability.
Source: Team Xray
Permanent link to this post (108 words, 2 images, estimated 26 secs reading time)
Posted in 1/10th Nitro RC Car, Hudy, Xray, Xray NT1 | No Comments »
Saturday, September 27th, 2008 | 213 views
Another great info from the great performing company, Xray. Here on how to service your driveshaft pin. Just like we posted before on how to service your bearing, here another detail and cost saving tips from Xray.
You do not have to change the whole drive shaft just because the pin is broken or worn out. That is why the Part #106000 HUDY Drive Pin Replacement Tool is created, just to save you more money.
Posted in 1/10th Nitro RC Car, Hudy, Xray, Xray NT1 | No Comments »
Thursday, September 25th, 2008 | 128 views
Xray has come up with another improvement, The Xray NT1 2 speed lightweight shaft. With 50% lighter than the standard shaft. This of course help in the fast acceleration due to the lighter rotating mass. Xray as usual does not sacrifice strength and durability in doing this. This is for serious racers that demand every little bit out of their car.
Posted in 1/10th Nitro RC Car, Xray NT1 | No Comments »
Tuesday, September 23rd, 2008 | 243 views
Waaah!! This is maybe for real. The Motonica P10, 1/10th GP Car kit. Thanks to our partner from 3hobby.net we got this first peek last night. Interesting design indeed and probably unlike its 1/8th Motonica P8.0R, this kit looks to be like the others. Actually from the picture, nothing spectacular but as sometimes for us, we totally wrong. Haha
click to see more pictures and video …
Posted in 1/10th Nitro RC Car, Motonica P10 | No Comments »
Tuesday, September 16th, 2008 | 182 views
Another exciting product coming from Xray. The Super Lightweight Solid Axle for the racers. The solid axle is 56% lighter than the standard solid axle. It’s ultra strong one piece CNC machined from HUDY Spring Steel and coming with it is another lightweight, the aircraft aluminum pulley adapter.
Posted in 1/10th Nitro RC Car, Xray, Xray NT1 | No Comments »
